Landi Renzo NG1 reducer completes the range of tested and approved reducers.
High quality CNG reducer (pressure regulator) designed for sequential gas injection systems of 4th generation with the engines power up to 265 kW (360 HP). It is manufactured at Landi Renzo Italy. All raw materials and components being used for the manufacture possess all the necessary quality certificates. Reducer’s high performance was achieved by the use of a gas regulator with increased flow. Flap (lever) mechanism of the pressure regulator ensures reliability and maintenance-freeReducer NG1 has got very high thermal efficiency because it is made of material with high thermal conductivity which guarantees stable gas temperature at high loads.
Reducer is equipped with an internal pressure relief valve which guarantees safety for both the engine and reducer. The evaporator has got plastic rotary water pipe elbow and standard inlet (O5) for a reducer temperature sensor. NG1 does not have an integrated gas solenoid valve, so in order to fully use the power of this regulator, it is recommended to install it together with an HP Solenoid Valve with increased gas flow.
- Output pressure: 2 bar
- Pressure adjustment range: 1,3 ÷ 1,9 bar
- Engine power: <360 HP
- Pressure regulation: SW4
- Gas inlet port diameter: Ø8 mm
- Gas outlet port diameter: Ø16 mm
- Vacuum input: Ø5 mm